Advantage Shutter

The Roll-A-Shutter Advantage range is available in a large range of sizes, comes with a choice of slotting, perforation and slat styles. Also features optional high cycle operation.
  • Suited to multitude of applications
  • Wide range of slat styles & colours
  • Perforation & slotting available
  • High cycle operation available 
  • Loads of options
Robust shutter Advantage is available in either .6, .8, 1.0 or 1.2 mm slats - suited to a multitude of applications including factories, warehouses, carparks, kiosks, bars and more.
 
  Size  
Slat Thickness Min.
Height
Max. Height Min.
Width
Max.
Width
6/100 900 6000 900 7000
8/100 900 6000 900 7000
10/100 900 10000 900 12000
12/100* 900 10000 900 12000
* Up to 10,000 (h) x 11,500 (w) or 8,400 (h) x 12,000 (w)

Bottom Rail

6/100*
8/100*
10/100*
12/100*
Extruded aluminium T section bottom rail. Top edge formed to interlock with the bottom slat of the shutter.
OPTIONS: 
Steel box section,  75mm (h) x 40mm (w) bottom rail.
Top edge formed to interlock with bottom slat of shutter, cold roll formed from 2mm steel.
Taper: Optional, Minimum taper 30mm. Maximum taper 150mm.
Weatherseal: Standard.
Wind rated not available with wicket gate option.
Slats over 7 metres wide or tapered slats requires a box section bottom rail.

 
Locking

6/100
8/100
10/100
12/100
Standard: Internal chain seat. OPTIONS: Key locking: Fitted for aluminium bottom rail. Locking bolts: For steel bottom rail only. Internal use only. Bottom rail shoot bolt. Internal  and external  slide bolts or key locking on aluminium bottom rails up to 4800mm wide.
Rivers lock.
Note: Hand operated supplied standard with external bottom rail slide bolt.


Guides
  • Steel channel, cold roll formed, 2.0mm steel, depth of 70mm.
  • Windlocking: Optional.
  • Guides cold roll formed, 3.2mm steel, minimum depth 85mm, measuring 50mm across back, with 40mm x 12mm mild steel bar welded to inside surface of the guide.

Springs
  • Helical torsion type drum springs, made from spring steel wire.
  • Spring life designed for 20,000 cycles.

Drum 
  • Steel tube drum, a minimum O.D of 168mm x 3.18mm wall thickness.
  • Designed so drum stress does not exceed 124MPa. Drum is fitted with bearings, mounted on a bright mild steel spindle with a minimum thickness of 35mm.
Direct Lift
  • Directly driven motor requiring no springs within the drum.
  • Inclusive of a patented safety brake system.
  • Drive life designed for 100,000 cycles with safe drive*.
*6/100 & 8/100 slats are only designed for 50,000 cycles.

  Operation
  • Manual hauling chain on guide rope, chain geared or power driven.

Brackets
  • Two piece bracket can be mounted inside or outside, or on either side of opening 
  • 12mm mild steel construction.
     
Finishes
  • Galvanised steel finish with all M/S components prime coated.
  • Optional powder coat finish available when specified.
  • Hauling chains shall be zinc passivated. Colorbond is optional.

Options
  • Ventilation: Optional
  • Mullions: Optional
  • Personnel access: Optional
  • Wicket gates (inward opening) 1200mm (h) x 600mm (w)
  • Escape gates (outward opening) 2030mm (h) x 1020mm (w)
  • Access gate (inward opening) 2030mm (h) x 1020mm (w)
  • Windlocked: Optional
  • Tapers: 30mm to 150mm.

SLAT PERFORATION
SLAT THICKNESS SOLID SLAT PERFORATION SLOTTED SLAT(% free area / slat)
6/100 N/A N/A 32mm Round
(14.5%)
8x77
(4%)
18.5x101
(13%)
8/100 N/A N/A 32mm Round
(14.5%)
8x77
(4%)
18.5x101
(13%)
10/100 N/A (40%) 32mm Round
(14.5%)
8x77
(4%)
18.5x101
(13%)
12/100 N/A N/A 32mm Round
(14.5%)
8x77
(4%)
18.5x101
(13%)

The NT Deemed to Comply Manual (DTCM) is referenced in the Building Code of Australia, Volume 2, Part 3.10.1 as an acceptable construction manual for high wind areas.

 

Envir-A-Shutter

The B&D Envir-A-Shutter™ is our fully insulated aluminium shutter. It is the perfect choice for applications that require thermal or sound insulation.
  • Thermal insulation properties
  • Sound insulation
  • Decreased noise during operation
  • Strong yet lightweight
  • Stylish design 
The B&D Envir-A-Shutter™ is our fully insulated aluminium shutter. It is the perfect choice for applications that require thermal or sound insulation.

Curtain
  • A1 Alloy 3005 H18. This material features extensive rigidity of 205Mpa and yield strength of 187Mpa.
  • The proportion of filled foam is 32kg/ m3.
  • Dimensions: 19mm thick and nominal effective slat width of 77mm.
  • Vision slat: 17.8mm thick and nominal effective slat width of 78mm. 
  Finish
  • Beckrypol ARS353 coating, which is available in two standard colours, Off White and Cream.
  • This is a polyester system modified with polyamide beads to give a high degree of scratch resistance.
  • Shutter slats may also be powder coated. Hauling chains: Zinc dichromate plated.
  Curtain Clips
  • Moulded nylon clips fitted to alternate slats by two rivets.
  Guides
  • A1 alloy, white extruded aluminium channel with rubber inserts.
  • Min. depth: 105mm Width (back): 34mm.
  Gears
  • B&D Series 2 Planetary Gearing. 5:1 ratio manual gearbox or electric drive with gearing ratio selected in accordance with shutter size.
  Torque Tube
  • Galvanised steel tube diameter: 203mm
  • Wall thickness: 1.6mm, fitted with 30% glass filled polypropylene drums mounted on a 33.7mm axle.
  • Axle end reinforcement on larger doors as specified.
  Locking
  • Standard: No locking is normally provided.
  • Options: Aluminium slide bolts for use with padlocks, fitted internally.
  • Electric operation: Incorporates a self locking worm in the drive, which prevents the torque tube from rotating and effectively locks the shutter.
  Brackets
  • Fabricated from 50 x 50 x 6mm mild steel angle and used with double saddles and 100mm steel bolts.
  Bottom Rail
  • Extruded aluminium as standard.

The NT Deemed to Comply Manual (DTCM) is referenced in the Building Code of Australia, Volume 2, Part 3.10.1 as an acceptable construction manual for high wind areas.